Barracuda FencingGet a free estimate

Natural look, custom layouts

Wood Fence Installation

The lowest cost to get a real privacy fence up, and the one that looks like it belongs on an older property. It asks for maintenance in return.

Wood privacy fence under construction along a residential backyard in Florida

What wood gives you

Warmth that vinyl and metal do not have, the lowest entry price of any privacy fence we install, and the ability to shape a run to the property — stepping down a slope, following an irregular line, working around what is already there.

It is also the material that asks the most of you afterwards. Read the maintenance section before you decide.

Heights

Six foot privacy

Full-height boards for back yards. This is the standard privacy height and what most people mean by a wood fence.

Four foot

Lower boundary runs for front yards and side lines. Noticeably less per linear foot than six foot — less material, less rail, less labour.

Maintenance, honestly

Florida is the hardest climate in the country for wood. Sun, daily rain for half the year, and humidity that never really drops.

Seal it every two to three years and it lasts well over a decade. Skip that and you will see grey boards within a couple of seasons and soft posts at ground level not long after.

If nobody in the house is going to seal a fence every couple of years, the honest recommendation is vinyl. It costs more up front and asks for nothing but a wash.

How we build it

Pressure-treated posts set in concrete, at a depth matched to your ground. Rails fastened to the posts, boards to the rails. The posts are the part that decides how long the fence lasts, so that is where the work goes.

On sloped ground a run either steps down in sections or follows the grade. We show you both on site — they look very different once built.

Wood work in progress and finished

Pressure-treated fence posts set along a Florida property line
Posts set before boards go on
Wood privacy fence being assembled at a residential property
Rails and boards going up
Completed wood fence run at a South Florida home
Completed run

Other materials

Vinyl for the same privacy without the upkeep. Chain-link if the goal is containment at the lowest cost rather than privacy. Existing wood fence leaning or with broken boards? See fence repair.

Common questions

How often does a wood fence need sealing in Florida?
Every two to three years, sooner on the sides that take direct afternoon sun and rain. Skipping it is what turns a wood fence grey and soft years before it should fail.
Do wood fences warp in this climate?
Some movement is normal — boards take on moisture in the rainy season and give it back in the dry months. Pressure-treated lumber, correct spacing and proper fastening keep that to cupping rather than boards twisting off the rails.
How long will it last?
Maintained, well over a decade. Left unsealed in Florida humidity, posts start going at ground level much sooner. The posts fail before the boards do, which is why post depth and treatment matter more than picket thickness.
Four foot or six foot?
Six foot for back yard privacy, four foot for front and side boundaries. Six foot costs more per foot than four — taller boards, more rail, deeper posts.
Can you stain or paint it for us?
New pressure-treated lumber has to dry out before it will hold a finish, usually a few months. We tell you when it is ready and what to use.

Ready for a number?

Draw your fence line on the map and get a preliminary range in minutes. The onsite estimate that follows is free.

Start my estimate